Idaho truck weight limits
On Interstate highways in Idaho, federal weight limits apply. Four checks decide whether your truck is legal — and the one that surprises most drivers is the Federal Bridge Formula, which can fail a truck that passes every other limit.
Federal limits on Idaho Interstates
| Limit | Maximum | Applies to |
|---|---|---|
| Single axle | 20,000 lb | Any one axle |
| Tandem axle group | 34,000 lb | Axles 40–96 inches apart |
| Tridem axle group | governed by the bridge formula | 3 axles in a group (no flat federal cap) |
| Gross vehicle weight | 80,000 lb | The whole rig |
| Bridge formula | varies by spacing | Every group of 2+ axles |
The bridge formula check
L is the spacing in feet between the outer axles of a group, N the number of axles. A standard 5-axle rig at 51 ft is capped at 79,500 lb by this formula — under the 80,000 lb gross limit. Full explanation with worked examples.
Idaho-specific rules
Off the Interstate, Idaho sets its own axle and gross limits, seasonal restrictions and oversize/overweight permit rules through its state transportation agency. These change and carry legal weight — always confirm current Idaho rules with the official state source before running at the edge of a limit.
Scaled heavy in Idaho?
If the trailer tandems are over, the fix is usually a computed tandem slide, not unloading — see how sliding tandems shifts weight. And here's what an overweight ticket really costs before you decide to run it.
Run your scale-ticket weights through the federal and bridge-formula calculator in your browser. The full platform predicts axle loads from load placement before you load, computes the exact slide-to-legal fix, and applies Idaho rules on top of the federal baseline.
Open the free calculatorOur calculator runs the federal single, tandem, gross and Bridge Formula checks in seconds. The full platform adds per-state limits, axle-load prediction and the slide-to-legal fix.
Try the free calculator